UCW TYPE- ONCO LINE

cGMP WASHING AND DISINFECTION EQUIPMENT WITH ISOLATION SYSTEM

UCW TYPE- ONCO LINE

cGMP WASHING AND DISINFECTION EQUIPMENT WITH ISOLATION SYSTEM

UCW ONCO machines are specifically designed to wash chemically and/or thermally disinfect and dry surfaces contaminated by cancer drugs or highly potent active pharmaceutical ingredients (API).
These units feature an isolation system.

SOLIDS AND SEMI-SOLIDS

WATER + DETERGENTS + AIR

20°C – 120°C

Process features
Additional information

Standard and custom programmes for all needs. The machine process is developed by our Automation department in compliance with current codes/standards and the type of product being processed. Products go from dirty to being ready to be sterilised, by means of a pre-wash, chemical and/or clean steam wash, rinse with PW or WFI (recirculation or direct flow) and a final HEPA 13-filtered hot air drying phase whilst keeping the water TOC level, conductivity and pH level under control. During the product wash phase, chemicals and/or clean steam can be injected by a precise and reliable system in order to improve the machine’s cleaning efficiency.

Single-wall square or rectangular cross-sectjion chamber made of 316L or 316Ti stainless steel.
Innovative central pumping/draining sump made of 316L or 316Ti stainless steel (70% water saving)
Piping and air ducts made entirely of 316L stainless steel with sanitary fittings (tri-clamp ferrules and hygienic flanges).
3D (dead leg)-compliant piping system with minimum 3-degree incline of the pipes towards the floor drain.
Any surfaces in contact with the product are mechanically polished to a roughness level of less than 0.35 micron.
Rounded internal chamber corners to facilitate a perfect cleaning.
Manual folding chamber doors or vertical/horizontal automatic sliding doors (door structure made of 316L or 316Ti stainless steel with a HST tempered glass inspection window).
Sleeves with gloves for ‘operator-product’ isolation + RTP valve for unloading contaminated bags; both installed on the washing equipment door.
Automatic valve control station installed on the ‘contaminated’ bin, installed inside the chamber.
Telescopic and automatic washing nozzles for the inner bin surfaces
High-pressure washing inside the bin (up to 60 bar).
Double-lip chamber seal made of silicone rubber.
Components and tools made of 316L/316Ti stainless steel and elastomers in compliance with FDA 21 CFR, Part 177.
The chamber pipes, components and instruments are suitably insulated with high-tech material.
Area separation by means of a 304 or 316L/316Ti stainless steel “bio-seal” frame.
Brand-new design that connects the utilities to the internal cart, complete with an automatic locking and release system (100% seal guaranteed).
Manual or fully automated ergonomic product loading and unloading solutions.
Floor-level or elevated loading solutions.