TS-AS TYPE

cGMP TERMINAL STERILIZERS

TS-AS TYPE

cGMP TERMINAL STERILIZERS

These sterilizers are fitted with a built-in ventilation system that mixes the clean steam and air, creating the idea sterilization medium. This method is recommended for complex plastic or glass containers, such as pre-filled syringes or vials in which condensates may form that compromise
the finished product. The system guarantees an optimal heat distribution throughout the entire sterilization phase, with a temperature deviation less than ±1°C. Moreover, these autoclaves ensure an excellent drying process, thanks to the ventilation system that prepares the unloaded product for labelling and packaging.

LIQUIDS

MIXED AIR + STEAM

105°C – 121°C

Process features
Additional information

These sterilizers feature a built-in ventilation system that mixes the clean steam and air, which will become the sterilization medium.
This processing method is recommended for complex plastic or glass containers, such as pre-filled syringes or vials in which condensate may form and become problematic for the finished product. The system ensures optimum heat distribution throughout the entire sterilization phase (temperature deviation less than ± 1°C). These autoclaves also feature an improved drying process, thanks to the ventilation system that prepares the unloaded product for labelling and packaging.

Circular cross-section sterilization chamber with square or rectangular hatches (doors).
In the TS-AS model, a flat/circular jacket completely surrounds the chamber for a quick and uniform load heating/cooling.
Reinforcements are welded onto the outside of the chamber and/or jacket to ensure stable operating conditions.
The chamber is placed on a base designed to evenly distribute the weight on the floor.
The loading cart-insertion and removal guides are placed on the bottom of the chamber; they are also height-adjustable.
The bottom of the chamber converges towards the drain sump to facilitate the condensation drain.
Two 2” tri-clamp ferrules are welded to the chamber for validation purposes (temperature uniformity mapping and pressure tests).
All of the chamber’s internal surfaces are mechanically polished and then undergo chemical degreasing, pickling and passivation treatments. Surface finish ≤ 0.35 micron.
The chamber can be installed at floor level or in a pit (depending on the size).