NEBULA TYPE

cGLP STEAM AUTOCLAVES - SMALL VOLUMES

NEBULA TYPE

cGLP STEAM AUTOCLAVES - SMALL VOLUMES

The NEBULA autoclaves are designed to sterilize heat- and moisture-resistant materials, such as metal parts, plastic or rubber components, liquids in ventilated or sealed containers, and fabrics.

POROUS, NON-POROUS AND LIQUIDS

SATURATED STEAM

121°C – 134°C

Process features
Additional information

Standard and custom programmes for all needs. The machine process is developed by our Automation department in compliance with current codes/standards and the type of product being processed. Vacuum breaker tests, Bowie & Dick tests, Helix tests, air filter in situ sterilization and integrity tests; solid and porous material programme; programme for liquids in ventilated containers; programme for liquids in sealed containers; highly-sensitive material (filters) programme; rubber cap programme; decontamination cycle in compliance with BSL3 and BSL4 etc. The steam is injected into the chamber via a PID-controlled modulating valve and the condensate is continuously evacuated through the drain to ensure excellent heat distribution during the entire sterilization phase (temperature deviation less than ± 0.4°C).

Double-wall square or rectangular cross-section chamber, made entirely of 316L or 316Ti stainless steel.
Full dimpled jacket made of 304 or 316L/316Ti stainless steel.
Piping made entirely of 316L or 304 stainless steel.
Surfaces in contact with product and processing fluids are mechanically satin-finished to a roughness level lower than 1 micron.
Manual folding chamber doors or vertical/horizontal automatic sliding doors.
Pneumatically pressurised chamber door sealing gasket (with processing air).
Components and tools made of 316L/316Ti stainless steel and elastomers in compliance with FDA 21 CFR, Part 177.
The chamber pipes, components and instruments are suitably insulated with high-tech material.
Area separation by means of a 304 or 316L/316Ti stainless steel “bio-seal” frame.
‘Bio-seal’ flange for VHP isolator connection.
Manual or fully automated ergonomic product loading and unloading solutions.
Floor-level or elevated loading solutions.