“Standard” and custom programmes for every need. he equipment process is developed by our Automation Department, according to the current codes/standards and the type of product being processed. Initial inertisation with Nitrogen, the product cleaning phase (pre-wash, wash and rinse) with Acetone and finally, the drying phase with filtered compressed air. Whilst keeping the Oxygen concentration and Acetone pressure and temperature under constant control. Purified Water (PW) can be alternated with Acetone during the rinsing phase.
- Equipment manufactured and certified for use in areas at risk of explosion (ATEX).
- Single-walled square or rectangular chamber in 316L or 316Ti stainless steel.
- Innovative central pumping/draining sump in 316L or 316Ti stainless steel.
- Piping and air ducts made entirely from 316L stainless steel with sanitary fittings (tri-clamp ferrules and hygienic flanges).
- 3D (dead leg)-compliant along the entire piping system and a minimum inclination of 3° of the same towards the floor drain.
- Acetone containment tank made entirely of 316L stainless steel.
- Any surfaces that come into contact with the product are mechanically polished to a roughness level of less than 0.35 micron.
- Rounded internal chamber corners to ensure a perfect clean.
- Manual folding chamber doors or vertical/horizontal automatic sliding doors (316L or 316Ti stainless steel door with a HST tempered glass inspection window).
- Chamber door oil seal made of silicone rubber.
- 316L/316Ti stainless steel components and tools, in addition to elastomers manufactured in compliance with FDA 21 CFR, Part 177.
- The chamber, heads, pipes, components and instruments are properly insulated by a cutting-edge material.
- Zone separation by means of a 304 or 316L/316Ti stainless steel “bio-seal” septum.
- A brand-new design that connects the utilities to the internal trolley, complete with an automatic locking and unlocking system (100% seal guaranteed)
- Washing action by means of properly sized rotating heads (spray balls).
- Manual or fully automated ergonomic product loading and unloading solutions.
- Floor or elevated loading solutions.
cGMP combined water + acetone washing and disinfection equipment
PHARMA DIVISION
Combined washing and disinfection equipment description
The UCW equipment has been specifically designed to process wash, disinfect and dry surfaces contaminated with medication or active pharmaceutical ingredients (API).
SOLIDS AND SEMI-SOLIDS
WATER + ACETONE + AIR
20°C – 30°C
“Standard” and custom programmes for every need. he equipment process is developed by our Automation Department, according to the current codes/standards and the type of product being processed. Initial inertisation with Nitrogen, the product cleaning phase (pre-wash, wash and rinse) with Acetone and finally, the drying phase with filtered compressed air. Whilst keeping the Oxygen concentration and Acetone pressure and temperature under constant control. Purified Water (PW) can be alternated with Acetone during the rinsing phase.
- Equipment manufactured and certified for use in areas at risk of explosion (ATEX).
- Single-walled square or rectangular chamber in 316L or 316Ti stainless steel.
- Innovative central pumping/draining sump in 316L or 316Ti stainless steel.
- Piping and air ducts made entirely from 316L stainless steel with sanitary fittings (tri-clamp ferrules and hygienic flanges).
- 3D (dead leg)-compliant along the entire piping system and a minimum inclination of 3° of the same towards the floor drain.
- Acetone containment tank made entirely of 316L stainless steel.
- Any surfaces that come into contact with the product are mechanically polished to a roughness level of less than 0.35 micron.
- Rounded internal chamber corners to ensure a perfect clean.
- Manual folding chamber doors or vertical/horizontal automatic sliding doors (316L or 316Ti stainless steel door with a HST tempered glass inspection window).
- Chamber door oil seal made of silicone rubber.
- 316L/316Ti stainless steel components and tools, in addition to elastomers manufactured in compliance with FDA 21 CFR, Part 177.
- The chamber, heads, pipes, components and instruments are properly insulated by a cutting-edge material.
- Zone separation by means of a 304 or 316L/316Ti stainless steel “bio-seal” septum.
- A brand-new design that connects the utilities to the internal trolley, complete with an automatic locking and unlocking system (100% seal guaranteed)
- Washing action by means of properly sized rotating heads (spray balls).
- Manual or fully automated ergonomic product loading and unloading solutions.
- Floor or elevated loading solutions.
cGMP combined water + acetone washing and disinfection equipment
PHARMA DIVISION
Combined washing and disinfection equipment description
The UCW equipment has been specifically designed to process wash, disinfect and dry surfaces contaminated with medication or active pharmaceutical ingredients (API).
SOLIDS AND SEMI-SOLIDS
WATER + ACETONE + AIR
20°C – 30°C
cGMP combined water + acetone washing and disinfection equipment
PHARMA DIVISION
Combined washing and disinfection equipment description
The UCW equipment has been specifically designed to process wash, disinfect and dry surfaces contaminated with medication or active pharmaceutical ingredients (API).
SOLIDS AND SEMI-SOLIDS
WATER + ACETONE + AIR
20°C – 30°C
“Standard” and custom programmes for every need. he equipment process is developed by our Automation Department, according to the current codes/standards and the type of product being processed. Initial inertisation with Nitrogen, the product cleaning phase (pre-wash, wash and rinse) with Acetone and finally, the drying phase with filtered compressed air. Whilst keeping the Oxygen concentration and Acetone pressure and temperature under constant control. Purified Water (PW) can be alternated with Acetone during the rinsing phase.
- Equipment manufactured and certified for use in areas at risk of explosion (ATEX).
- Single-walled square or rectangular chamber in 316L or 316Ti stainless steel.
- Innovative central pumping/draining sump in 316L or 316Ti stainless steel.
- Piping and air ducts made entirely from 316L stainless steel with sanitary fittings (tri-clamp ferrules and hygienic flanges).
- 3D (dead leg)-compliant along the entire piping system and a minimum inclination of 3° of the same towards the floor drain.
- Acetone containment tank made entirely of 316L stainless steel.
- Any surfaces that come into contact with the product are mechanically polished to a roughness level of less than 0.35 micron.
- Rounded internal chamber corners to ensure a perfect clean.
- Manual folding chamber doors or vertical/horizontal automatic sliding doors (316L or 316Ti stainless steel door with a HST tempered glass inspection window).
- Chamber door oil seal made of silicone rubber.
- 316L/316Ti stainless steel components and tools, in addition to elastomers manufactured in compliance with FDA 21 CFR, Part 177.
- The chamber, heads, pipes, components and instruments are properly insulated by a cutting-edge material.
- Zone separation by means of a 304 or 316L/316Ti stainless steel “bio-seal” septum.
- A brand-new design that connects the utilities to the internal trolley, complete with an automatic locking and unlocking system (100% seal guaranteed)
- Washing action by means of properly sized rotating heads (spray balls).
- Manual or fully automated ergonomic product loading and unloading solutions.
- Floor or elevated loading solutions.
We may be small, but we can achieve great things.
Thanks to our customisable after-sales service packages, we offer solutions to suit every need. Choose the one that suits you best!
COMPREHENSIVE AFTER-SALES SUPPORT
INTEGRATED SOLUTIONS
SCHEDULED MAINTENANCE
Customisation is quick and easy
Keep up to date with the latest news from the Last Technology worldand let us steer you towards the most suitable service for you!